Brick Paver Installation & Edging



Staging of product

The majority of paver projects will vary depending on access, site conditions, job size and obviously, the weather. These situations can have a general impact on your project from a timing stand point. Careful consideration ought to be taken to determine the time to start the paver installation. Constantly aim to lessen or avoid any traffic on the ready areas.

The foreman or project supervisor must always have the products (sand/ pavers) dispersed around the job site for effective and easy setups. Paver pallets/bundles ought to be placed in a manner not to hinder the paver installation. The appropriate pallet/bundle placement can make the real job installation simpler and quicker by lowering the general labor of handling the product.

Brick paver patterns

Pavers can be placed in several patterns depending upon their shape. Each paver shape will typically have several various hatch patterns that are offered by the manufacturer.

Contractors require to take into consideration the traffic weight loads on their paver tasks. In many applications around the world, it has been revealed that pavers laid in a herringbone pattern have performed properly.

Pavers that are 60 mm (2 - 3/8 in) density are suitable for pedestrian applications. Pavers that are going to be utilized in commercial or commercial applications must be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a number of conditions that determine the starting point of a paver job.

When starting to set up pavers it is best to snap a true straight chalk line on the surface of the bedding sand or pull a real straight string line above the surface of the bedding sand at the completed elevation of the pavers This will assist as a guide for maintaining straight joint lines and will likewise permit the installer to make modifications in the positioning of the pavers.

Structures and concrete suppressing are typically not straight and should not be utilized for establishing straight joint lines. The usage of string lines is necessary to determine the true straightness of the edge. As the paver installation progresses, the string lines will help lessen the requirement for small trim pieces.

These will preserve a minimum joint width and permit the bed linen and jointing sand to go into in between each paver. Pavers with spacer bars are usually not laid in snug versus each other since a string line will provide constant joint spacing.

Installation of brick pavers.

One of the most extensively used techniques for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along one of the true straight lines that you have actually pulled or above the bed linen sand. The finest technique is to place a paver against another one and let it move down into the bed linen sand.

When installing pavers on a steep grade, they should Tree Service Del Ray Beach be set up at the base of the grade going uphill. This will avoid the pavers from creeping as they are being laid.

The best method for setting up pavers on large projects is to install them mechanically. There are a couple products a professional ought to think about prior to installing pavers mechanically:

1.) Mechanical installers are just efficient in installing pavers in certain patterns.

2.) The professional should ensure that the manufacturer can production and bundling pavers in the preferred pattern on the pallets for easy mechanical installation.

Poor color mixing might result in an irregular looking installation. The majority of makers are constant with color mixing on each package of pavers, however it is the specialist's duty to make sure proper blending in the field.

Cutting treatments for brick pavers.

Contractors typically have 2 methods of cutting pavers. When cutting pavers damp, it will assist reduce dust and will extend the diamond blades life. The operator of the brick saw ought to always cut the pavers away from the surface area of the paver field when cutting damp, due to the reality that the pavers will produce a slurry that will stain the paver surface.

The brick saw operator ought to always use the proper protection that is required for running a saw, such as eye, ear, breathing and hand defense ).

Edging types

Edge restraints play a significant role in the general success of an interlocking pavement installation Edging restraints remove lateral motion of the pavers and hold the pavers securely together. Particularly at the outer perimeter of the paver application, without an edging restraint, your job is ensured to stop working gradually.

There are a number of different edging restraints from which contractors can choose. Generally produced edge restraints are the most commonly used by specialists. Produced edging restraints can range from, plastic edging, steel and aluminum, timbers or precast concrete and stone. An edging type that is utilized mostly in industrial and industrial applications is poured-in-place concrete curbs. This edging restraint is normally set up by other contractors.

Edging installation.

This might result in the migration of the bedding sand and ultimate lateral movement of the pavers. If there is a possibility of losing bed linen sand in between the pavers and the edge restraint, then geo textile fabric is suggested. When a space between the pavers and the edging goes beyond 3/8" (10mm), then the area should be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers need to be compressed. The entire area that is to be compacted must be swept tidy of any foreign objects and debris that can trigger scratching or scuffing on the surface of the pavers.

In addition, it is essential that the very first compaction takes place prior to any jointing sand has been used to the pavers. If jointing sand is applied to the pavers before compaction takes location, this can cause a bridging problem and will not permit the joints to be completely filled with jointing sand. This can also avoid the pavers from being correctly set into the bed linen sand.

When compacting the pavers, it is suggested that you make a minimum of two passes in various directions across the pavers. This will permit the pavers to be correctly embeded in the bedding sand and will require the bed linen sand up into the joints from the bottom of the pavers.

The compaction of the pavers is very vital to the final performance of the pavers. Failure to do correct compaction can result in deformations and pavement failure over time.


Paver pallets/bundles must be placed in a way not to interfere with the paver installation. One of the most widely utilized methods for the installation of pavers is hand installation of each paver. The operator of the brick saw ought to constantly cut the pavers away from the surface of the paver field when cutting wet, due to the truth that the pavers will develop a slurry that will stain the paver surface. Edging restraints get rid of lateral motion of the pavers and hold the pavers tightly together. When a space between the pavers and the edging surpasses 3/8" (10mm), then the area should be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *